AUTONOMOUS PHOTOVOLTAIC & LED LIGHTING SYSTEMS
Autonomous photovoltaic lighting system SAFO20
Autonomous photovoltaic lighting system SAFO 20 is designed for aautonomous street lighting, parks and other facilities except carriageway roads. The system is designed to ensure SNiP23-05-95 "Natural and artificial lighting." While creating the system the latest advances in the field of photovoltaics were used, LED lighting sources and storage elements that can effectively use the system in areas with harsh climatic conditions and low solar insolation. To conserve energy in the system turn on their light on at dusk in standby mode (20% brightness). When the person appears in the detection zone 6 - 12 m system goes into operation mode (100% brightness). When leaving a detection zone, the system returns to standby mode. Such algorithm lighting system allows an average of 70% reduction in power consumption from the battery. In addition, such work system allows its use as a security device.
The system requires no maintenance and replacement parts during the entire period of operation. Dimensions and weight of the system as it facilitates installation. In such class, the system has the best ratio of price - quality.
Composition of a typical lighting system
LED light with a built-in driver to control a light and a human detection sensor – 1 pc.
Photovoltaic solar module – 1 pc.
Battery pack with built-in controller – 1 pc.
-Mount of a system to a pillar – 1 pc.
-Set of connection cables – 1 pc.
Technical characteristics of a typical lighting system
1. Directivity pattern of the light according to GOST 17677-82 – semi expanded
2. Minimum illumination in the horizontal plane with suspension of the light at a height of 6 m away from the point of suspension of 6 m in the radiation pattern in the operation mode, not less, lux – 10
3. Minimum illumination in the horizontal plane with suspension of the light at a height of 6 m away from the point of suspension of 6 m in the radiation pattern in the standby mode, not less, lux – 2
4. Total hours with a fully charged battery with the absence of insolation at an ambient temperature from -20 ˚:
- operation mode, hour – 26
- standby mode, hour – 72
5. Rated voltage of the light, V – 12
6. Power consumption of the light, Wt – 20
7. Nominal battery voltage, V – 12.8
8. Minimum battery voltage, V – 12.0
9. Capacity of the battery in ambient temperature from -20 ˚C to 60 ˚C, A*h – 40
10. Quantity of charge-discharge cycles of the battery, times – 3500
11. Duration of battery power with solar insolation 1000 Wt / sq. m, not more than, hour – 8
12. Power of photovoltaic solar module, not less, Wt – 200
13. Power of photovoltaic solar module on the back side (for modules with two-way sensitivity), not less, Wt – 110
Maintenance of a typical lighting system
1. Operating temperature range, deg. – -35 +80
2. Lifetime without replacing the input devices, years – 10
3. Warranty period, years – 3
4. Class of protection – IP65
Physical characteristics of a typical lighting system
1. Overall dimensions of the light, mm – 550x240x67
2. Weight of the light, kg – 7.5
3. Overall dimensions of the battery pack, mm – 260x220x140
4. Weight of the battery, kg – 9
5. Dimensions of the PV module, mm – 1568x808x43
6. Weight of PV module, kg – 17
Color LED lightning CL75
Features
- Adopting super bright LED, with low light decay, high effect, environmental friendly and safe.
- The unique lightning circuit design, no light pollution, no glare, no stroboscopic phenomenon, high effect, low power consumption, long lifespan, good stability, high reliability.
- Adoptiong optics lens to bring a higher light transmittance and exellent light effect.
- Easy to mounting.
Technical data
- Light color: Mono: cool white (CW), neutral white (NW) or warm white (WW); White 3000K ~ 7500K changeable; RGB 16.7 million color.
- Driver interface: DMX 512 (RS485) protocol.
- Controls: DMX 512 (RS485) controllrer.
- Lightning source: 54pcs High Power LEDs (R18/G18/B18).
- Input voltage: 220-240V AC/50Hz.
- Power supply: DC 24V (external).
- Power consumption: Max 75W.
- Protect rating: Outdoor IP66.
- Size: 1354x58x69mm.
- Working temperature: -30 ºC ~ 45 ºC
- Life span: > 50.000 hours.
LED STREETLIGHT SK30D
SK 30D for an outdoor purpose and the human body tilt sensor could be used with the energy saving attach and high efficiency ignition.
Specification
Power consumptio - 30W
Brightness (lx) - 20 (6 m)
Total flux (lm) - 2000
Life time - 50,000 hrs
Outline dimension - 550x216x67 mm
Color Temp. - 5000-8000 K
Input voltage - 24 VDC
Protection rating - Outdoor IP 66
Beam Angle - 120º
Weight - 6.2 Kg (7.2 Kg - exportation)
Housing - Aluminium & PC
LED STREETLIGHT STL90W
STL 90W street lamp for road lighting and high-efficiency lighting and energy-saving purpose.
Specification
Power consumptio - 90W
Brightness (lx) - 80 (6 m)
Total flux (lm) - 6000
Life time - 50,000 hrs
Outline dimension - 550x216x67 mm
Color Temp. - 5000-8000 K
Input voltage - 24 VDC
Protection rating - Outdoor IP 66
Beam Angle - 120º
Weight - 6.2 Kg
Housing - Aluminium & PC
LED Interior Lighting T8
Easy to install on T8 fluorescence tube socket, super high brightness output, no flicker. good thermal dissipation design energy saving, environment friendly, long life time, UV or IR free, high-efficient power design.
Specification TM8-11W (TM8-21W)
Power consumption - 11W (21W)
Outline dimention - ø26x594,4 mm (ø26x1212 mm)
Color Temp. - 6000K (6000K)
Brightness (lm) - 263 (380)
Total flux (lm) - 792 (1,570)
Efficiency (lm/w) - 72 (74)
DC forward current - 0.48A (0.48A)
Weight - 145 g (295 g)
Beam Angle - 170º (170º)
Number of LEDs - 60ea (120ea)
Life Time - 50,000 hrs (50,000 hrs)
Note: DC type product (needed special SMPS).
LED Interior Lighting PANEL SERIES
This product is good for the high-quality level place such as a conference room, hospital, high level restaurant, etc. Slim design reduced to minimize the existence of a general lighting structure. Easy to install. color changeable, dimming avaliable, environment friendly, energy reducton.
Specification
Power consumption - 50W
Outline dimention - 610x610 mm
Color Temp. - 3000K 6500K
Brightness (lm) - 1.030 1,200
Total flux (lm) - 2,800 3,100
DC forward current - 0.28A
Weight - 4,9 Kg
Beam Angle - 120º
Number of LEDs - 288ea
Life Time - 50,000 hrs
Note: Color temp. changeable / dimmable product avaliable.
LED Interior Lighting FACTORY LIGHTING
Over 50,000hr endurance (semi-permanent) which is 40 times longer than that of incandescent lamp. energy saving through high converting rate to light compared with current lamp. No toxic substance such as Hg (vercury), Pb (lead) and decrease of CO2 emission. Realize controller's lifetime of 30,000hr through no resistance component circuit.
Specification
Power consumption - 100W
Outline dimention - 350x230x63 mm
Color Temp. - 3000K-6000K
Life Duration - 4,000hr
Input voltage - AC 100-240V
Beam Angle - 30º
Number of LEDs - 3 Chip Package
Weight - 4 Kg (SMPS includes)
LED Landscape Lighting SG SERIES
POWER BAR is a indoor/outdoor linear color changing fixture ideal for high output wall washing and large alcove and archway lighting End-to-end fixture connections provide a continuous, uniform color wash up. The base is designed to simplify installation by minimizing parts and allowing for after-installation rotation. POWER BAR can be controlled by a common DMX512 controller or simpler one.
Specification
Power consumption - 25W (50W)
Outline dimention - 81x450x77.68 mm (81x900x77.68 mm)
Color Temp. - white 3000K-6000K / RGB 16.7 million color
Input voltage - 24 VDC
Protection rating - In/Outdoor IP 66
Beam Angle - 10º/30º
Number of LEDs - 18LEDs (36LEDs)
Housing - Aluminium
LED Landscape Lighting GL240FC
The GL240FC is an thin, submersible fixture designed to provide color-changing light in fresh and water locations to a depth of 1 m. Its very simple and light in weight but very tight aluminium housing. GL240FC is perfect for buried ground or water based applications situated in extreme high humidity environments. It is intended for use with 24V power supplies and DMX controllers.
Specification
Power consumption - 7W
Outline dimention - 500x20x14 mm
Color Temp. - RGB 16.7 million color (option - white color)
Input voltage - 24 VDC
Protection rating - In/Outdoor IP 66
Beam Angle - 120º
Number of LEDs - 24LEDs (3in1 SMD LED)
Housing - PC
LED Landscape Lighting MD SERIES
LED landscape lighting theme parks, trails, bike paths, building exterior, and views can be expressed beautifully.
Specification
Power consumption - 50W
Color Temp. - RGB 16.7 million color
Input voltage - DC 24V
Beam Angle - 120º Clear lens (35* Clear lens)
Housing - AL / Tempered glass
IP Level - IP 66
Outline dimention - ø260x300 mm
* Adjust the specification according to customer specifications.
LED Landscape Lighting FL LIGHT
FL Light combines fantastic, saturated wall washing color and color changing effects with high-performance operational efficiency and simplified installation FL Light has the capability of auto-addressing, which simplifies installation, addressing and programming. FL Light is a sealed product designed for both indoor and outdoor installations. The fixture is fully enclosed in dtylish and rugged aluminium housing and meets specifications for use in wet locations. The pre-assembled mounting base provides smooth, friction-free rotation. The base is designed to simplify installation by minimizing parts and allowing for after-installation rotation. FL Light can be controlled by a common DMX512 controller or simpler one.
Specification
Power consumption - 25W
Outline dimention - 178x252x158 mm
Color Temp. - RGB 16.7 million color
Brightness (lm) - 192
Input voltage - 24VDC
Protection rating - In/Outdoor IP66
Beam Angle - 10º/30º
Number of LEDs - 18LEDs (R6, G6, B6)
Housing - Aluminium
